FIWARE IoT Agents NGSI v2 XML

Description: This tutorial a wires up the dummy IoT devices which are responding using a custom XML message format. A custom IoT Agent is created based on the IoT Agent Node.js library and the framework found in the IoT Agent for Ultralight devices so that measurements can be read and commands can be sent using NGSI-v2 requests sent to the Orion Context Broker.

The tutorial uses cUrl commands throughout, but is also available as Postman documentation

Run in Postman


Passing custom message formats

"And the whole earth was of one language, and of one speech."

— Genesis 11:1

As defined previously, an IoT Agent is a component that lets a group of devices send their data to and be managed from a Context Broker using their own native protocols. Every IoT Agent is defined for a single payload format, although they may be able to use multiple disparate transports for that payload.

IoT Agents for many standard payloads exist, however it is possible to envisage that additional payloads may be needed as many potential sources of context data have already their own well-defined de-facto or de-jure standards for passing data around systems. As an example the ISOXML standard iso:11783 is frequently used with Agricultural Machinery.

The process for creating your own IoT Agent is relatively simple. It is best achieved through selecting an IoT Agent which uses the required data transport and rewriting/amending the payload processing code to handle the payloads in question.

For the purpose of this tutorial we will amend code from the existing Ultralight IoT Agent to process a similar custom XML format. A direct comparison of the two IoT Agents can be seen below:

IoT Agent for Ultralight IoT Agent for JSON Protocol's Area of Concern
Sample Measure c\|1 Sample Measure <measure device="lamp002" key="xxx">
 <c value="1"/>
</measure> Message Payload
Sample Command Robot1@turn\|left=30 Sample Command <turn device="Robot1">
 <left>30</left>
</turn>
Message Payload
Content Type is text/plain Content Type is application/xml Message Payload
Offers 3 transports - HTTP, MQTT and AMPQ Offers 3 transports - HTTP, MQTT and AMPQ Transport Mechanism
HTTP listens for measures on iot/d by default HTTP listens for measures on iot/xml by default Transport Mechanism
HTTP devices are identified by parameters ?i=XXX&k=YYY HTTP devices are identified by payload <measure device="XXX" key="YYY"> Device Identification
HTTP commands posted to a well-known URL - response is in the reply HTTP commands posted to a well-known URL - response is in the reply Communications Handshake
MQTT devices are identified by the path of the topic /XXX/YYY MQTT devices are identified by the path of the topic /XXX/YYY Device Identification
MQTT commands posted to the cmd topic MQTT commands posted to the cmd topic Communications Handshake
MQTT command responses posted to the cmdexe topic MQTT commands posted to the cmdexe topic Communications Handshake

As can be seen, the supported communications transports (HTTP, MQTT, AMPQ) remain the same, it is processing of the custom payload which will need to be adapted to ensure that the XML devices can communicate with the IoT Agent.

It should be noted that, depending on your use case, it also may be necessary to create an additional middleware for communications purposes. In this example the devices are capable of sending measures and listening and responding to commands directly on two separate comms channels. A different paradigm is used within the LoRaWAN and OPC-UA IoT Agents where an HTTP middleware responds to the IoT Agent, and it is then responsible for converting the communications to the lower-level CoAP transport used by the devices.

The teaching goal of this tutorial

The aim of this tutorial is to improve developer understanding of how to create their own custom IoT Agents, a series of simple modificiations has been made to the code of the Ultralight IoT Agent demonstrating how to make changes. The tutorial consists of a walkthrough of the relevant code and a series of HTTP requests to connect the new IoT Agent. The code can be found within the current GitHub Repository

Reusing Common Functionality

The benefit of modifying an existing IoT Agent is that the developer will be able to reuse the common functionality found across all IoT Agents. This includes functions such as:

  • Offering a standard location to listen to device updates
  • Offering a standard location to listen to context data updates
  • Holding a list of devices and mapping context data attributes to device syntax
  • Security Authorization

This base functionality has been abstracted out into a common IoT Agent framework library

Device Monitor

For the purpose of this tutorial, a series of dummy IoT devices have been created, which will be attached to the context broker. Details of the architecture and protocol used can be found in the IoT Sensors tutorial The state of each device can be seen on the JSON device monitor web page found at: http://localhost:3000/device/monitor

FIWARE Monitor

Architecture

This application builds on the components created in previous tutorials. It will make use of one FIWARE component - the Orion Context Broker plus a Custom IoT Agent for XML. Usage of the Orion Context Broker is sufficient for an application to qualify as “Powered by FIWARE”. Both the Orion Context Broker and the IoT Agent and rely on open source MongoDB technology to keep persistence of the information they hold. We will also be using the dummy IoT devices created in the previous tutorial, however they have been already been adapted to respond to the custom XML messaging format.

Therefore the overall architecture will consist of the following elements:

  • The FIWARE Orion Context Broker which will receive requests using NGSI-v2
  • The Custom IoT Agent for XML which will receive southbound requests using NGSI-v2 and convert them to XML commands for the devices
  • The underlying MongoDB database :
    • Used by the Orion Context Broker to hold context data information such as data entities, subscriptions and registrations
    • Used by the IoT Agent to hold device information such as device URLs and Keys
  • A webserver acting as set of dummy IoT devices using the custom XML messaging protocol running over HTTP.

Since all interactions between the elements are initiated by HTTP requests, the entities can be containerized and run from exposed ports.

The necessary configuration information for wiring up the IoT devices and the IoT Agent can be seen in the services section of the associated docker-compose.yml file:

Dummy IoT Devices Configuration

tutorial:
    image: fiware/tutorials.context-provider
    hostname: iot-sensors
    container_name: fiware-tutorial
    networks:
        - default
    expose:
        - "3000"
        - "3001"
    ports:
        - "3000:3000"
        - "3001:3001"
    environment:
        - "DEBUG=tutorial:*"
        - "PORT=3000"
        - "IOTA_HTTP_HOST=iot-agent"
        - "IOTA_HTTP_PORT=7896"
        - "DUMMY_DEVICES_PORT=3001"
        - "DUMMY_DEVICES_API_KEY=4jggokgpepnvsb2uv4s40d59ov"
        - "DUMMY_DEVICES_TRANSPORT=HTTP"
        - "DUMMY_DEVICES_PAYLOAD=XML"

The tutorial container is listening on two ports:

  • Port 3000 is exposed so we can see the web page displaying the Dummy IoT devices.
  • Port 3001 is exposed purely for tutorial access - so that cUrl or Postman can make JSON commands without being part of the same network.

The tutorial container is driven by environment variables as shown:

Key Value Description
DEBUG tutorial:* Debug flag used for logging
WEB_APP_PORT 3000 Port used by web-app which displays the dummy device data
IOTA_HTTP_HOST iot-agent The hostname of the IoT Agent for JSON - see below
IOTA_HTTP_PORT 7896 The port that the IoT Agent for JSON will be listening on. 7896 is a common default for JSON over HTTP
DUMMY_DEVICES_PORT 3001 Port used by the dummy IoT devices to receive commands
DUMMY_DEVICES_API_KEY 4jggokgpepnvsb2uv4s40d59ov Random security key used for IoT interactions - used to ensure the integrity of interactions between the devices and the IoT Agent
DUMMY_DEVICES_TRANSPORT HTTP The transport protocol used by the dummy IoT devices
DUMMY_DEVICES_PAYLOAD XML The message payload protocol by the dummy IoT devices

The other tutorial container configuration values described in the YAML file are not used in this tutorial.

Custom IoT Agent for XML Configuration

The code for the custom XML IoT Agent can be found within the GitHub Repository associated to this tutorial. It is a copy of the 1.12.0 version of the IoT Agent for Ultralight, lightly modified as described below. The associated Dockerfile merely copies the code into an appropriate location within a Docker container running Node.js. This allows the component to be instansiated using a docker-compose.yaml file. The necessary configuration can be seen below:

iot-agent:
    image: fiware/iotagent-xml
    build:
        context: iot-agent
        dockerfile: Dockerfile
    hostname: iot-agent
    container_name: fiware-iot-agent
    depends_on:
        - mongo-db
    networks:
        - default
    expose:
        - "4041"
        - "7896"
    ports:
        - "4041:4041"
        - "7896:7896"
    environment:
        - IOTA_CB_HOST=orion
        - IOTA_CB_PORT=1026
        - IOTA_NORTH_PORT=4041
        - IOTA_REGISTRY_TYPE=mongodb
        - IOTA_LOG_LEVEL=DEBUG
        - IOTA_TIMESTAMP=true
        - IOTA_CB_NGSI_VERSION=v2
        - IOTA_AUTOCAST=true
        - IOTA_MONGO_HOST=mongo-db
        - IOTA_MONGO_PORT=27017
        - IOTA_MONGO_DB=iotagentjson
        - IOTA_HTTP_PORT=7896
        - IOTA_PROVIDER_URL=http://iot-agent:4041
        - IOTA_DEFAULT_RESOURCE=/iot/xml

The iot-agent container relies on the precence of the Orion Context Broker and uses a MongoDB database to hold device information such as device URLs and Keys. The container is listening on two ports:

  • Port 7896 is exposed to receive JSON measurements over HTTP from the Dummy IoT devices
  • Port 4041 is exposed purely for tutorial access - so that cUrl or Postman can make provisioning commands without being part of the same network.

The iot-agent container is driven by environment variables as shown:

Key Value Description
IOTA_CB_HOST orion Hostname of the context broker to update context
IOTA_CB_PORT 1026 Port that context broker listens on to update context
IOTA_NORTH_PORT 4041 Port used for Configuring the IoT Agent and receiving context updates from the context broker
IOTA_REGISTRY_TYPE mongodb Whether to hold IoT device info in memory or in a database
IOTA_LOG_LEVEL DEBUG The log level of the IoT Agent
IOTA_TIMESTAMP true Whether to supply timestamp information with each measurement received from attached devices
IOTA_CB_NGSI_VERSION v2 Whether to supply use NGSI v2 when sending updates for active attributes
IOTA_AUTOCAST true Ensure JSON number values are read as numbers not strings
IOTA_MONGO_HOST context-db The hostname of mongoDB - used for holding device information
IOTA_MONGO_PORT 27017 The port mongoDB is listening on
IOTA_MONGO_DB iotagentjson The name of the database used in mongoDB
IOTA_HTTP_PORT 7896 The port where the IoT Agent listens for IoT device traffic over HTTP
IOTA_PROVIDER_URL http://iot-agent:4041 URL passed to the Context Broker when commands are registered, used as a forwarding URL location when the Context Broker issues a command to a device
IOTA_DEFAULT_RESOURCE /iot/xml The default path the IoT Agent uses listenening for custom XML measures.

Start Up

Before you start you should ensure that you have obtained or built the necessary Docker images locally. Please clone the repository and create the necessary images by running the commands as shown:

git clone https://github.com/FIWARE/tutorials.Custom-IoT-Agent.git
cd tutorials.Custom-IoT-Agent

./services create

Thereafter, all services can be initialized from the command-line by running the services Bash script provided within the repository:

./services start

:information_source: Note: If you want to clean up and start over again you can do so with the following command:

bash ./services stop

Creating a Custom IoT Agent

The following section consists of a series of HTTP commands used to provision the IoT Agent and receive measures and send commands. The relevant amended code within the Custom IoT Agent is discussed as each action is processed.

To follow the tutorial correctly please ensure you have the device monitor page available in your browser and click on the page to enable audio before you enter any cUrl commands. The device monitor displays the current state of an array of dummy devices using XML syntax

Device Monitor

The device monitor can be found at: http://localhost:3000/device/monitor

Checking the IoT Agent Service Health

You can check if the IoT Agent is running by making an HTTP request to the exposed port:

1 Request:

curl -X GET \
  'http://localhost:4041/iot/about'

The response will look similar to the following:

{
    "libVersion": "2.6.0-next",
    "port": "4041",
    "baseRoot": "/",
    "version": "1.12.0-next"
}

This is standard functionality coming directly from the IoT Agent Node.js library and does not involve an code changes.

Provisioning a Service Group

Invoking group provision is always the first step in connecting devices since it is always necessary to supply an authentication key with each measurement and the IoT Agent will not initially know which URL the context broker is responding on.

It is also possible to set up default commands and attributes for all anonymous devices as well, but this is not done within this tutorial as we will be provisioning each device separately.

This example provisions an anonymous group of devices. It tells the IoT Agent that a series of devices will be sending messages to the IOTA_HTTP_PORT (where the IoT Agent is listening for Northbound communications)

2 Request:

curl -iX POST \
  'http://localhost:4041/iot/services' \
  -H 'Content-Type: application/json' \
  -H 'fiware-service: openiot' \
  -H 'fiware-servicepath: /' \
  -d '{
 "services": [
   {
     "apikey":      "4jggokgpepnvsb2uv4s40d59ov",
     "cbroker":     "http://orion:1026",
     "entity_type": "Thing",
     "resource":    "/iot/xml"
   }
 ]
}'

In the example the IoT Agent is informed that the /iot/xml endpoint will be used and that devices will authenticate themselves by including the token 4jggokgpepnvsb2uv4s40d59ov. For the custom XML IoT Agent this means devices will be sending POST requests to:

http://iot-agent:7896/iot/xml

Where the <measure> holds the relevant device ID and API key.

<measure device="motion001" key="4jggokgpepnvsb2uv4s40d59ov">
    <c value="3"/>
</measure>

This syntax differs from the Ultralight IoT Agent where the device ID and API key are sent as URL parameters.

Reading XML - Analysing the Code

The relevant changes can be found in the HTTPBindings.js file where an XML parser is instanciated.

const xmlBodyParser = require("express-xml-bodyparser");
httpBindingServer.router.post(
    config.getConfig().iota.defaultResource || constants.HTTP_MEASURE_PATH,
    ...xmlBodyParser({ trim: false, explicitArray: false }),
    checkMandatoryParams(false),
    ...etc
);

This means that attributes from the XML request can be accessed using the square-bracket syntax. Since both apiKey and deviceId are required parameters, they can be found within the received <measure>.

function checkMandatoryParams(queryPayload) {
    return function(req, res, next) {
        var notFoundParams = [],
            error;

        req.apiKey = req.body["measure"]["$"]["key"];
        req.deviceId = req.body["measure"]["$"]["device"];

        if (!req.apiKey) {
            notFoundParams.push("API Key");
        }

        if (!req.deviceId) {
            notFoundParams.push("Device Id");
        }

        // CHeck if retrievingParam
        if (queryPayload && !req.query.d && req.query.getCmd !== "1") {
            notFoundParams.push("Payload");
        }

        if (req.method === "POST" && !req.is("application/xml")) {
            error = new errors.UnsupportedType("application/xml");
        }

        if (notFoundParams.length !== 0) {
            next(new errors.MandatoryParamsNotFound(notFoundParams));
        } else {
            next(error);
        }
    };
}

This function also checks that the appropriate MIME type has been received and fails fast if the incoming message does not hold sufficient information.

Provisioning a Sensor

It is common good practice to use URNs following the NGSI-LD specification when creating entities. Furthermore it is easier to understand meaningful names when defining data attributes. These mappings can be defined by provisioning a device individually.

Three types of measurement attributes can be provisioned:

  • attributes are active readings from the device
  • lazy attributes are only sent on request - The IoT Agent will inform the device to return the measurement
  • static_attributes are as the name suggests static data about the device (such as relationships) passed on to the context broker.

Note: in the case where individual ids are not required, or aggregated data is sufficient the attributes can be defined within the provisioning service rather than individually.

3 Request:

curl -iX POST \
  'http://localhost:4041/iot/devices' \
  -H 'Content-Type: application/json' \
  -H 'fiware-service: openiot' \
  -H 'fiware-servicepath: /' \
  -d '{
 "devices": [
   {
     "device_id":   "motion001",
     "entity_name": "urn:ngsi-ld:Motion:001",
     "entity_type": "Motion",
     "timezone":    "Europe/Berlin",
     "attributes": [
       { "object_id": "c", "name": "count", "type": "Integer" }
     ],
     "static_attributes": [
       { "name":"refStore", "type": "Relationship", "value": "urn:ngsi-ld:Store:001"}
     ]
   }
 ]
}
'

As expected the HTTP command to provision a device does not change based on the underlying payload or transport protocol since we are using the same HTTP transport as the original Ultralight IoT Agent. internal_atttributes can be used to supply additional information for the custom IoT Agent if necessary. In the request we are associating the device motion001 with the URN urn:ngsi-ld:Motion:001 and mapping the device reading c with the context attribute count (which is defined as an Integer) A refStore is defined as a static_attribute, placing the device within Store urn:ngsi-ld:Store:001

You can simulate a dummy IoT device measurement coming from the Motion Sensor device motion001, by making the following XML request

4 Request:

curl -L -X POST 'http://localhost:7896/iot/xml' \
-H 'Content-Type: application/xml' \
--data-raw '<measure device="motion001" key="4jggokgpepnvsb2uv4s40d59ov">
    <c value="3"/>
</measure>'

Reading Measures - Analysing the Code

Both the payload and the Content-Type have been updated. The dummy devices made a similar Ultralight request in the previous tutorials when the door was unlocked, you will have seen the state of each motion sensor changing and a Northbound request will be logged in the device monitor.

Now the IoT Agent is connected, the service group has defined the resource upon which the IoT Agent is listening (iot/xml) and the API key used to authenticate the request (4jggokgpepnvsb2uv4s40d59ov) is found in the body. Since both of these are recognized, the measurement is valid.

The next step is to parse the payload extract the attributes. This can be found in the amended parse method of the xmlparser.js file

function parse(payload) {
    let result = [];
    const keys = Object.keys(payload["measure"]);
    for (let i = 0; i < keys.length; i++) {
        if (keys[i] !== "$") {
            let obj = {};
            obj[keys[i]] = payload["measure"][keys[i]]["$"].value;
            result.push(obj);
        }
    }
    return result;
}

parse() returns a JSON array of key-value pairs which can then be mapped from device attribute names (like c) to entity attribute names (like count) - obviously the mapping is based on the values sent in the original provisioning.

You can see that a measurement has been recorded, by retrieving the entity data from the context broker. Don't forget to add the fiware-service and fiware-service-path headers.

5 Request:

curl -X GET \
  'http://localhost:1026/v2/entities/urn:ngsi-ld:Motion:001?type=Motion' \
  -H 'fiware-service: openiot' \
  -H 'fiware-servicepath: /'

Response:

{
    "id": "urn:ngsi-ld:Motion:001",
    "type": "Motion",
    "TimeInstant": {
        "type": "ISO8601",
        "value": "2018-05-25T10:51:32.00Z",
        "metadata": {}
    },
    "count": {
        "type": "Integer",
        "value": "3",
        "metadata": {
            "TimeInstant": {
                "type": "ISO8601",
                "value": "2018-05-25T10:51:32.646Z"
            }
        }
    },
    "refStore": {
        "type": "Relationship",
        "value": "urn:ngsi-ld:Store:001",
        "metadata": {
            "TimeInstant": {
                "type": "ISO8601",
                "value": "2018-05-25T10:51:32.646Z"
            }
        }
    }
}

The response shows that the Motion Sensor device with id=motion001 has been successfully identified by the IoT Agent and mapped to the entity id=urn:ngsi-ld:Motion:001. This new entity has been created within the context data. The c attribute from the dummy device measurement request has been mapped to the more meaningful count attribute within the context data.

Provisioning an Actuator

Provisioning an actuator is similar to provisioning a sensor. This time an endpoint attribute holds the location where the IoT Agent needs to send the JSON command and the commands array includes a list of each command that can be invoked. The example below provisions a bell with the deviceId=bell001. The endpoint is http://iot-sensors:3001/iot/bell001 and it can accept the ring command. The transport=HTTP attribute defines the communications protocol to be used.

6 Request:

curl -iX POST \
  'http://localhost:4041/iot/devices' \
  -H 'Content-Type: application/json' \
  -H 'fiware-service: openiot' \
  -H 'fiware-servicepath: /' \
  -d '{
  "devices": [
    {
      "device_id": "bell001",
      "entity_name": "urn:ngsi-ld:Bell:001",
      "entity_type": "Bell",
      "transport": "HTTP",
      "endpoint": "http://iot-sensors:3001/iot/bell001",
      "commands": [
        { "name": "ring", "type": "command" }
       ],
       "static_attributes": [
         {"name":"refStore", "type": "Relationship","value": "urn:ngsi-ld:Store:001"}
      ]
    }
  ]
}
'

As is the case with provisioning a measure, this request remains unchanged. Implicitly within the structure of the IoT Agent the provisioning of commands fulfills the following implied contract:

  1. The custom IoT Agent is making a registration for an attribute
  2. The custom IoT Agent each request for updating context (on the /v2/op/update endpoint)
  3. A decision is made how to handle the request - for both the Custom IoT Agent and the Ultralight Agent this follows the paradigm of setting a <command>State attribute, amending and forwarding the request on a /cmd endpoint to the device (or alternatively to a middleware responsible for the device).

The first two items - listening to context changes from the context broker follow the well-defined NGSI syntax and therefore are common to all IoT Agents. However the third item - what to do to prepare the message for ongoing consumption will vary according to the protocol which is being abstracted out.

Before we wire-up the context broker, we can test that a command can be send to a device by making a REST request directly to the IoT Agent's North Port using the /v2/op/update endpoint. It is this endpoint that will eventually be invoked by the context broker once we have connected it up. To test the configuration you can run the command directly as shown:

7 Request:

curl -iX POST \
  http://localhost:4041/v2/op/update \
  -H 'Content-Type: application/json' \
  -H 'fiware-service: openiot' \
  -H 'fiware-servicepath: /' \
  -d '{
    "actionType": "update",
    "entities": [
        {
            "type": "Bell",
            "id": "urn:ngsi-ld:Bell:001",
            "ring" : {
                "type": "command",
                "value": ""
            }
        }
    ]
}'

If you are viewing the device monitor page, you can also see the state of the bell change.

The result of the command to ring the bell can be read by querying the entity within the Orion Context Broker.

Reading Commands - Analysing the Code

Within the custom IoT Agent the start() function sets a series of handler functions to fire when a request arrives from the context broker.

iotAgentLib.setProvisioningHandler(deviceProvisioningHandler);
iotAgentLib.setConfigurationHandler(configurationHandler);
iotAgentLib.setCommandHandler(commandHandler);
iotAgentLib.setDataUpdateHandler(updateHandler);

This is passed to the appropriate transport binding and in this case, the commandHandler() method within HTTPBindings.js is fired. It provides an HTTP error handler, but delegates the actual work of creating and sending the command to the device to generateCommandExecution().

function generateCommandExecution(apiKey, device, attribute) {
...
    const options = {
        url: device.endpoint,
        method: 'POST',
        body: xmlParser.createCommandPayload(device, cmdName, cmdAttributes),
        headers: {
            'fiware-service': device.service,
            'fiware-servicepath': device.subservice
        }
    };
... etc

The payload itself, in other words how a command must be created such that it can be interpreted by the device, is unique to our custom XML messaging protocol and is generated in createCommandPayload() method in xmlParser.js.

function createCommandPayload(device, command, attributes) {
    if (typeof attributes === "object") {
        let payload = "<" + command + '  device="' + device.id + '">';

        Object.keys(attributes).forEach(function(key, value) {
            payload = payload + "<" + key + ">" + value + "</" + key + ">";
        });
        payload = payload + "</" + command + ">";
        return payload;
    } else {
        return "<" + command + '  device="' + device.id + '"/>';
    }
}

This is an amendment from the Ultralight protocol where the @ and | symbol is generated for Ultralight devices.

However creating a payload is only half the job, it must be sent to the device and understood, so communications must be completed using a well-defined communications handshake. So after generating the payload the sendXMLCommandHTTP() method of HTTPBindings.js sends the message and passes the response to the result() method in xmlParser.js to interprets the command response from the device.

function result(payload) {
    const xmlToJson = require("xml-parser");
    const data = xmlToJson(payload);
    const result = {};
    result.deviceId = data.root.attributes.device;
    result.command = data.root.attributes.command;
    result.result = data.root.name;

    return result;
}

Finally the success or failure of the command is updated into the context broker using common code from the IoT Agent node library.

As is typical for IoT Agents, creation of payloads and the handshake of communications has been split into two separate concerns for ease of maintenance. Therefore since in our case only the payload has changed, it is only the XML payload side of the code that needs modification to fulfil our custom use case.

The result of the actutator command can be read in the context broker using standard NGSI commands.

8 Request:

curl -X GET \
  'http://localhost:1026/v2/entities/urn:ngsi-ld:Bell:001?type=Bell&options=keyValues' \
  -H 'fiware-service: openiot' \
  -H 'fiware-servicepath: /'

Response:

{
    "id": "urn:ngsi-ld:Bell:001",
    "type": "Bell",
    "TimeInstant": "2018-05-25T20:06:28.00Z",
    "refStore": "urn:ngsi-ld:Store:001",
    "ring_info": " ring OK",
    "ring_status": "OK",
    "ring": ""
}

The result of ring command can be seen in the value of the ring_info attribute.

Once a custom IoT Agent has been developed, users will be able to actuate the devices purely by sending standard NGSI requests to the context broker, the low-level underlying protocol however remains unknown to them and has been successfully abstracted into the IoT Agent.